All customers of VAG Diagnostics Ltd can download the software to use with our VCDS. Software for VCDS 908 Cables (Cables with VAG908 printed on them).
CAUTION: There's several versions of VAG-COM sold online. Unfortunately 99% of them are using low-grade hardware chip with additional of cracked VCDS software ( sometimes needed an awkward computer date adjustment). If you own this kind of version, know half of it's functions don't work. For that reason we recommend you get the high-quality cable with original, unlocked and full version of VCDS software from Ross-Tech™ — by clicking.
STEP 1: Install Ross-Tech VCDS Software DO NOT plug VAG-COM cable into computer yet. Uninstall any other VCDS versions, if present on computer. Then delete c: Ross-Tech folder. Install VCDS software.
Make sure to tick ON 'Install 32-bit'. (If option is grayed out, don't worry, continue.) Leave original installation path of: C: Ross-Tech VCDS When install is complete, do not launch VCDS.
Exit the Installer. Iar embedded workbench for avr crack. STEP 2: Plug VAG-COM Cable Into Computer Plug VAGCOM cable into any USB port. Windows will install drivers automatically. If driver install fails, skip to. STEP 3: Disable Internet & Launch VCDS Software Golden Rule: Disconnect from WIFI before launching VCDS software. Read golden rule above?
If yes, then. Launch VCDS software from Start Menu.
Or from C: Ross-Tech VCDS VCDS.exe Go to: Options » Test (leave it as USB) It should show ' Port Status: OK': Click 'Save'. STEP 4: Enable license On main screen, click on button: Make sure it says: If it shows instead: Invalid/Unauthorized, then do again: Go to: Options » Test It should show 'Port Status: OK' > Save > You're now ready to scan your car! Troubleshooting: You are here because when you inserted VAG-COM cable for first time, Windows failed to install drivers properly. SOLUTION 1: Leave cable connected to computer.
Restart computer. It should be fixed now. SOLUTION 2: VAGCOM cable should be connected to computer. 1) Go to Control Panel.
• Windows Vista/7/8/10: Control Panel » System » Device Manager • Windows XP: Control Panel » System » 'Hardware' tab » Device Manager 2) Expand 'Ports (COM & LPT)' or 'Universal Serial Bus Controllers'. You're looking for a device that has name 'Ross-Tech' in it. It will have a yellow mark next to it like this: Here's an example: OR it may show as 'Ross-Tech Direct USB Interface'. 3) Right-click on this device with the yellow mark » Update Driver Software. 4) Choose ' Browse Computer for Driver Software'.
5) Browse to: ' C: Ross-Tech VCDS'. It should look like this: 6) Click 'Next'.
When you get below message, choose ' Install this driver software anyway'. When driver installation is complete, disconnect cable from computer. Restart computer.
When you're back in Windows, you may connect cable into computer, and go to. SOLUTION 3: If after SOLUTION 2, cable is still showing a Yellow mark ( ), then you're likely on Windows 8, 8.1, 10 or above. In this case, disconnect cable. And disable driver signature enforcement.
Here's how: When done, go to. Notes: • DO NOT update the software to latest version, else it will not work. Only works on current version. • If you bought your VAG-COM cable from us, then registration is not needed. It's already registered/licensed.
- Author: admin
- Category: Category
All customers of VAG Diagnostics Ltd can download the software to use with our VCDS. Software for VCDS 908 Cables (Cables with VAG908 printed on them).
CAUTION: There's several versions of VAG-COM sold online. Unfortunately 99% of them are using low-grade hardware chip with additional of cracked VCDS software ( sometimes needed an awkward computer date adjustment). If you own this kind of version, know half of it's functions don't work. For that reason we recommend you get the high-quality cable with original, unlocked and full version of VCDS software from Ross-Tech™ — by clicking.
STEP 1: Install Ross-Tech VCDS Software DO NOT plug VAG-COM cable into computer yet. Uninstall any other VCDS versions, if present on computer. Then delete c: Ross-Tech folder. Install VCDS software.
Make sure to tick ON 'Install 32-bit'. (If option is grayed out, don't worry, continue.) Leave original installation path of: C: Ross-Tech VCDS When install is complete, do not launch VCDS.
Exit the Installer. Iar embedded workbench for avr crack. STEP 2: Plug VAG-COM Cable Into Computer Plug VAGCOM cable into any USB port. Windows will install drivers automatically. If driver install fails, skip to. STEP 3: Disable Internet & Launch VCDS Software Golden Rule: Disconnect from WIFI before launching VCDS software. Read golden rule above?
If yes, then. Launch VCDS software from Start Menu.
Or from C: Ross-Tech VCDS VCDS.exe Go to: Options » Test (leave it as USB) It should show ' Port Status: OK': Click 'Save'. STEP 4: Enable license On main screen, click on button: Make sure it says: If it shows instead: Invalid/Unauthorized, then do again: Go to: Options » Test It should show 'Port Status: OK' > Save > You're now ready to scan your car! Troubleshooting: You are here because when you inserted VAG-COM cable for first time, Windows failed to install drivers properly. SOLUTION 1: Leave cable connected to computer.
Restart computer. It should be fixed now. SOLUTION 2: VAGCOM cable should be connected to computer. 1) Go to Control Panel.
• Windows Vista/7/8/10: Control Panel » System » Device Manager • Windows XP: Control Panel » System » 'Hardware' tab » Device Manager 2) Expand 'Ports (COM & LPT)' or 'Universal Serial Bus Controllers'. You're looking for a device that has name 'Ross-Tech' in it. It will have a yellow mark next to it like this: Here's an example: OR it may show as 'Ross-Tech Direct USB Interface'. 3) Right-click on this device with the yellow mark » Update Driver Software. 4) Choose ' Browse Computer for Driver Software'.
5) Browse to: ' C: Ross-Tech VCDS'. It should look like this: 6) Click 'Next'.
When you get below message, choose ' Install this driver software anyway'. When driver installation is complete, disconnect cable from computer. Restart computer.
When you're back in Windows, you may connect cable into computer, and go to. SOLUTION 3: If after SOLUTION 2, cable is still showing a Yellow mark ( ), then you're likely on Windows 8, 8.1, 10 or above. In this case, disconnect cable. And disable driver signature enforcement.
Here's how: When done, go to. Notes: • DO NOT update the software to latest version, else it will not work. Only works on current version. • If you bought your VAG-COM cable from us, then registration is not needed. It's already registered/licensed.